Altera DE2-115 User Manual download pdf (Page 48)

Figure 4-16 Connections between the GPIO connector and Cyclone IV E FPGA

The voltage level of the I/O pins on the expansion headers can be adjusted to 3.3V, 2.5V, 1.8V, or

1.5V using JP6 (The default value is 3.3V, see Figure 4-17). Because the expansion I/Os are

connected to Bank 4 of the FPGA and the VCCIO voltage (VCCIO4) of this bank is controlled by

the header JP6, users can use a jumper to select the input voltage of VCCIO4 to 3.3V, 2.5V, 1.8V,

and 1.5V to control the voltage level of the I/O pins. Table 4-11 lists the jumper settings of the JP6.

The pin-outs of the JP6 appear in Figure 4-17.

Figure 4-17 GPIO VCCIO supply voltage setting header

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 120 121

No comments

Altera DE2-115 User Manual Page 48