Altera DE2-115 User Manual download pdf (Page 10)

• PS/2 mouse/keyboard connector

• IR Receiver

• 2 SMA connectors for external clock input/output

• One 40-pin Expansion Header with diode protection

• One High Speed Mezzanine Card (HSMC) connector

• 16x2 LCD module

In addition to these hardware features, the DE2-115 board has software support for standard I/O

interfaces and a control panel facility for accessing various components. Also, the software is

provided for supporting a number of demonstrations that illustrate the advanced capabilities of the

DE2-115 board.

In order to use the DE2-115 board, the user has to be familiar with the Quartus II software. The

necessary knowledge can be acquired by reading the tutorials “

Getting Started with Altera’s DE2-115

Board” (tut_initialDE2-115.pdf) and “Quartus II Introduction” (which exists in three versions based on the design

entry method used, namely Verilog, VHDL or schematic entry). These tutorials are provided in the directory

DE2_115_tutorials on the DE2-115 System CD that accompanies the DE2-115 kit and can also be found on

Terasic’s DE2-115 web pages.

Figure 2-3 gives the block diagram of the DE2-115 board. To provide maximum flexibility for the

user, all connections are made through the Cyclone IV E FPGA device. Thus, the user can configure

the FPGA to implement any system design.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 120 121

No comments

Altera DE2-115 User Manual Page 10