107
Figure 6-26 Block diagram of the audio recorder and player
Demonstration Setup, File Locations, and Instructions
• Hardware Project directory: DE2_115_AUDIO
• Bit stream used: DE2_115_AUDIO.sof
• Software Project directory: DE2_115_AUDIO\software\
• Connect an Audio Source to the LINE-IN port of the DE2-115 board.
• Connect a Microphone to MIC-IN port on the DE2-115 board.
• Connect a speaker or headset to LINE-OUT port on the DE2-115 board.
• Load the bit stream into FPGA. (note *1)
• Load the Software Execution File into FPGA. (note *1)
• Configure audio with the Slide switches.
• Press KEY3 on the DE2-115 board to start/stop audio recoding (note *2)
• Press KEY2 on the DE2-115 board to start/stop audio playing (note *3)
•
Note:
(1). Execute DE2_115_AUDIO\demo_batch\audio.bat will download .sof and .elf files.
(2). Recording process will stop if audio buffer is full.
(3). Playing process will stop if audio data is played completely.
(4).If the HSMC loopback adapter is mounted, the I2C_SCL will be directly routed back to I2C_SDA.
Because audio chip, TV decoder chip and HSMC share one I2C bus, therefore audio and video chip won’t
function correctly.
Comments to this Manuals