Altera Corporation 33
Exercise 4: Analyze & Compare the Results in Hardware
3. Add jumpers to J3 and J19 (see Figure 25):
a. Place a jumper on pins 1 and 2 on J3 to connect the on-board
100 MHz oscillator to ADC CHANNEL A.
b. Place a jumper on pins 1 and 2 on J19 to connect the on-board
100 MHz oscillator to DAC CHANNEL B.
Figure 25. Jumpers J3 & J19 on the Stratix II EP2S180 DSP Development Board
Comments to this Manuals