Altera LVDS SERDES Transmitter / Receiver User Manual download pdf (Page 34)

Table 9: ALTLVDS_RX Parameters

Parameter Type Description

buffer_implementation String

Specifies where to implement the buffer. The

values are MUX, RAM, and LES. A value of MUX

implements a multiplexer instead of buffer

implementation. A value of RAM implements a

buffer in RAM blocks. A value of LES implements

a buffer in logic elements. The RAM and LES

values use more logic, but result in the correct

word alignment. If omitted, the default value is

RAM.

To use the buffer_implementation parameter,

the implement_in_les parameter must be

turned ON. You can also use the buffer_

implementation parameter with deserialization

factors of 5, 7, or 9 only.

common_rx_tx_pll

String Specifies whether the compiler uses the same

PLL for both the LVDS receiver and the LVDS

transmitter, or multiple LVDS receivers or

multiple LVDS transmitters, or both. You can

use common PLLs if the same input clock

source, same deserialization factor, same pll_

areset source, and same data rates are used.

Values are ON and OFF. If omitted, the default

value is ON.

data_align_rollover Integer Specifies, in pulses, when the DPA circuitry

restores the serial data latency to 0. You must

enable the rx_dpa_locked port and the

enable_dpa_mode parameter if this parameter is

specified. The legal integer value ranges from 1

to 11. If omitted, the default value is 4.

Command Line Interface Parameters

UG-MF9504

2014.12.15

Altera Corporation

LVDS SERDES Transmitter/Receiver IP Cores User Guide

Send Feedback

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 71 72

No comments

Altera LVDS SERDES Transmitter / Receiver User Manual Page 34