Altera Triple Speed Ethernet MegaCore Function User Manual Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 223
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
HW ResetDescriptionR/WNameDword
Offset
0Variable-length section-full threshold of the transmit
FIFO buffer. Use the depth of your FIFO buffer to
determine this threshold.
For cut-through mode, this threshold is typically set to
16. Set this threshold to a value above the tx_almost_
empty threshold.
For store-and-forward mode, set this threshold to 0.
In 10/100 and 1000 Small MAC core variations, this
register is RO and the register is set to a fixed value of 16.
RW/
RO
tx_section_full0x0A
0Variable-length almost-empty threshold of the receive
FIFO buffer. Use the depth of your FIFO buffer to
determine this threshold.
Due to internal pipeline latency, you must set this
threshold to a value greater than 3. This threshold is
typically set to 8.
In 10/100 and 1000 Small MAC core variations, this
register is RO and the register is set to a fixed value of 8.
RW/
RO
rx_almost_empty0x0B
0Variable-length almost-full threshold of the receive FIFO
buffer. Use the depth of your FIFO buffer to determine
this threshold.
Due to internal pipeline latency, you must set this
threshold to a value greater than 3. This threshold is
typically set to 8.
In 10/100 and 1000 Small MAC core variations, this
register is RO and the register is set to a fixed value of 8.
RW/
RO
rx_almost_full0x0C
0Variable-length almost-empty threshold of the transmit
FIFO buffer. Use the depth of your FIFO buffer to
determine this threshold.
Due to internal pipeline latency, you must set this
threshold to a value greater than 3. This threshold is
typically set to 8.
In 10/100 and 1000 Small MAC core variations, this
register is RO and the register is set to a fixed value of 8.
RW/
RO
tx_almost_empty0x0D
Altera Corporation
Configuration Register Space
Send Feedback
6-5
Base Configuration Registers (Dword Offset 0x00 0x17)
UG-01008
2014.06.30
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 222 223

Comments to this Manuals

No comments